Very limited offer. 

I have two brand new Black CHMs.  One is complete with the 3 sealed ball bearing mod as well as the stock brush set and wire brush cage.  This CHM is available for $139 plus $8 USPS shipping.  The other is a stock CHM with the two shielded bearings replaced with Sealed bearings and is available for $149 plus $8 USPS shipping.

This Black CHMs can be purchased via paypal here: e_vickery@bellsouth.net

Have you lost your Side Brush Screw on your 4XX - 4XXX model Roomba ?

Here's a deal you can't pass up!

Paypal me $1.65 at: e_vickery@BellSouth.net and I'll put 5 of these little screws in an envelope and mail them to you via USPS.

          ******NOTE******

These screws are only for the 4th generation Roomba, they will not fit or work on the 5XX model Roomba or 6XX model Roomba.

Retrofit your Dirt Dog, or other 4XX model Roomba by ordering this basic case that comes with the 3 main gears and the 3 Sealed Ball Bearings already installed.  All you add are the goodies from your own brush deck.  This retro kit is available for $75 plus $5 shipping.

There are two versions of the case.  The one seen here is yellow and has an opening for one Dirt Detect Sensor.  Also availabe is the Black brush deck case with two openings for the dual Dirt Detect Sensor assembly.

Payment is by paypal to this email:  e_vickery@BellSouth.net

Make sure to include what you are ordering and your mailing address.

Now available, an experimental kit to replace the broken CHM deck height adjustment cable.  It consists of two short (3 inch cables) and several connectors that can be used to construct a replacement cable.  Once complete the cable should be exactly 1 and 1/2 inches long.  The kit is $10 including USPS shipping.  International orders add $3.  Make your payment to paypal at e_vickery@bellsouth.net